FAQs: TSC Printronix T6000e/T8000

Perceptor Knowledge Base > FAQs > Printronix

1D

  • Code 128
  • EAN-8
  • EAN-13
  • UPC
  • 2of5 Interleaved
  • Code 39
  • Code 93

2D

  • DataMatrix
  • GS1 DataMatrix
  • QR Code
  • PDF417

5pt

Perceptor IoT can run with both existing and new T6000/T8000 printers.

For existing printers, purchase an ODV-2D, upgrade the printer firmware and apply the feature file.

 

  • Backfeed and overstrike
  • Backfeed retry and overstrike

Yes - an indicator light is provided as part of the Perceptor IoT hardware kit for both the T6000e and T8000 printers.

The light displays green as Perceptor successfully inspects and verifies labels. It displays red when a label is failed by Perceptor based on the inspection criteria selected for the label run.

8”/203mm per second

  • ISO Barcode grading
  • OCR/OCV
    • OCR Confidence Scores allow confidence scores to be set for text strings and confusing characters
  • Print Blemish
  • Pattern match
  • Large, rich text area
    • The Comparator Tool inspects large, rich text areas e.g. statutory information, ingredients in any language for accuracy and completeness.

0.23”/6mm

24”/609mm

Continuous, diecut and black mark.

Perceptor IoT can check for a numerical sequence - e.g. 0001, 00002, 00003 - in an ascending order.
Two consecutive numbers are needed to build the sequence e.g.10001, 10002. If the next number in this sequence is 10004 then it will fail 10004 and also 10005.
However, it will continue with 10006 because that follows a sequence after 10005 and the preceding 10004.
The user also has the facility to put in an incremental step of 1,2,3,4,5 or say 10.

Thermal transfer and direct thermal.

T6000e - 4”

T8000 - 4” and 6”

Tear-off, continuous and cutter.

T6000e

203/300/609 dpi

T8000

203/300 dpi

4.09”/104mm and 6”/152mm.

Yes - disable the OCR symbology in the ODV settings.

4” - 10mils/0.254mm

6” – 15 mils/0.381mm

Yes. An authorised user can disable Perceptor IoT to allow the printer to function as a normal printer. This is useful for optimising print quality before set up or running Perceptor IoT.

This 'disable' setting carries the highest level of user permission and should only be assigned to authorised personnel, as inappropriate access could result in labels being printed without inspection or recording.

Browse Solution Categories